Advanced S-Tek Flow System For Increased Efficiency With Continu


890 Units in Stock / 0 Sold
Add to Cart:

Convenient Payment Options

Pay by Bank transfer / Western union / Credit Card, FREE Of Charge Fee Now.

★More Results About Advanced S-Tek Flow System For Increased Efficiency With Continu

  • Model: 44784123
  • Shipping Weight: 10KG
  • 890 Units in Stock
  • Manufactured by: EcPur

Manufacturer Suggested Retail Price:599USD
IntroductionAs is the case with pumps, the SP series is constructed with longevity in mind and employs extensive use of corrosion proof materials resistant to the elements along with all chemicals commonly associated with pool maintenance
The 550W Electric Swimming Pool Pump takes care of cleaning, filtration and chlorine lt distribution. It features a revolutionised removable strainer basket with a built-in thermal overload protection - as the water circulates and passes through the filter, it leaves your pool squeaky clean, free from leaves, hair strands, debris and other impurities.
The SP series is designed to work in harmony with both your filtering unit and pool cleaner and will power along throughout the day. The fine filter basket ensures debris does not enter the pump, ensuring trouble free operation and extended life of filter sand.
Features100% Salt and Chlorine compatible
Full Size Removable Strainer Basket
Built-In Thermal Overload Protection
Works with In ground and Above Ground
Full Commercial Duty - Designed to run 24/7
Suitable for pools and spa's up to 45,000 litres
Powerful Self-Priming IP55 0.75HP Electric Motor
Ideal for Residential/Commercial Swimming Pools & Spa's
Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 240L/min
Technical ParametersModel: SPPE 100
Power: 550W/0.75HP
Voltage: 240 / 50Hz
Max. Flow: 240 L/m
Amps: 2.2
Head Max: 14m
Inlet: 40mm Internal / 50mm External
Outlet: 40mm Internal / 50mm External
Noise Level: <65dB
Pipe Compatibility: Fit 40mm plumbing internally and 50mm(2 inch) plumbing externally
How to use
1.Locate the pump as close as possible to the pool.
2.The pump suction line should not be smaller than the pressure line. All piping must be airtight
3.The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on.
4.The weight of the piping should be supported independently and not carried by the pump.
5.Fill the pump tank with water before starting.
6.High suction lifts, or long suction lines, require additional time and reduce the performance of the pump.
7.The water being pumped cools and lubricates the seal.
8.After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water.

Advanced S-Tek Flow System For Increased Efficiency With Continu